Forward Controls Design Archives - Operation Parts, Inc.

Forward Controls Design ESF-E, Endplate Sling Adapter Eyelet

Admin — Wed, 22 May 2024 20:39:57 +0000

Forward Controls Design ESF-E, Endplate Sling Adapter Eyelet (ESF-E) ESF-E (End plate, Sling adapter, FCD, Eyelet) is the latest member of the ESF family of end plates/sling adapters. Whereas ESF-H1 (single QD socket) and ESF-H1 (3 QD sockets) are end plates with QD sockets for QD sling swivels, ESF-E features an eyelet for use with […]

The post Forward Controls Design ESF-E, Endplate Sling Adapter Eyelet appeared first on Operation Parts, Inc..

Forward Controls Design Castle Nut Punch

Admin — Wed, 22 May 2024 19:41:38 +0000

Forward Controls Design Castle Nut Punch (CNP) CNP (Castle Nut Punch) is a dedicated castle nut staking punch, while it can do double duty as a golf tee or Van Helsing’s EDC, it was designed for a singular purpose, that is to displace material from an AR15/M16 end plate into the castle nut’s staking notches. […]

The post Forward Controls Design Castle Nut Punch appeared first on Operation Parts, Inc..

Forward Controls Design Upper Receiver v3, Anodized Black

Admin — Fri, 29 Dec 2023 17:02:07 +0000

Forward Controls Design Upper Receiver v3, Anodized Black (URF v3) URF v3 is a follow on development of URF-B v2, and will replace URF-B, v2 as we ramp up production Functionally, v3 and v2 share the same features, even if v3 looks slightly different than v2 URF v3 retained the following features: * LMT MARS-L […]

The post Forward Controls Design Upper Receiver v3, Anodized Black appeared first on Operation Parts, Inc..

Forward Controls Design 5.56mm Spec Handguard, Black

Admin — Tue, 11 Apr 2023 23:46:00 +0000

Forward Controls Design 5.56mm Spec Hand Guards (RHF) RHF (Railed Handguard, Forward Controls) is based on the superb CMT UHPR Mod2, with full length 1913 rails at 12 o’clock, and MLOK at 3, 6, and 9 o’clock. Since its introduction in 2018, RHF has progressively become more robust and durable with the deletion on lightening […]

The post Forward Controls Design 5.56mm Spec Handguard, Black appeared first on Operation Parts, Inc..

Forward Controls Design Carrier Cam Pin

Admin — Tue, 11 Apr 2023 23:09:21 +0000

Forward Controls Design Carrier Cam Pin (SCP) SCP (SOTAR Cam Pin) is a collaboration between Chad Albrecht of School of American Rifle) and Forward Controls Design. SCP features a machined dimple on one side of the carrier cam pin, so the user can always reinstall the cam pin on the carrier in the same orientation. […]

The post Forward Controls Design Carrier Cam Pin appeared first on Operation Parts, Inc..

Forward Controls Design Castle Nut for A5 Length

Admin — Tue, 11 Apr 2023 22:57:45 +0000

Forward Controls Design Castle Nut for A5 Length (CN5F) CN5F (Castle Nut, A5, Forward Controls) is an extended version of CNF we’ve been making since 2018. CN5F is designed specifically for the superb Vltor A5 system, CN5F is 0.1″ longer, and is as long as we can make a castle nut while ensuring backward compatibility, […]

The post Forward Controls Design Castle Nut for A5 Length appeared first on Operation Parts, Inc..

Forward Controls Design Flash Suppressor/Comp, Short, .223/5.56, 1/2×28

Admin — Tue, 11 Apr 2023 22:42:01 +0000

Forward Controls Design Flash Suppressor/Comp, Short, .223/5.56, 1/2×28 (6315KM-S, 223) 6315KM-S, 223 is a short Key Micro muzzle device for Dead Air Silencers sound suppressors. At 2.063″ long, it’s tiny compared to the 6315KM (2.4″). Like 6315 on which it’s based, 6315KM-S 223 has asymmetric ports to optimize muzzle rise compensation without creating obnoxious concussion […]

The post Forward Controls Design Flash Suppressor/Comp, Short, .223/5.56, 1/2×28 appeared first on Operation Parts, Inc..

Forward Controls Design 3 Prong Flash Suppressor, 1/2×28

Admin — Tue, 11 Apr 2023 22:28:46 +0000

Forward Controls Design 3 Prong Flash Suppressor, 1/2×28 (1815) We are a big fan of the A2 flash suppressor / compensator (compensator is the Army TM 9-1005-319-23&P, Air Force TO 11W3-5-5-42, Navy SW370-BU-MMI-010 designation). It is inexpensive, and does a decent job of what’s asked of it. We went through a phase of expensive and […]

The post Forward Controls Design 3 Prong Flash Suppressor, 1/2×28 appeared first on Operation Parts, Inc..

Forward Controls Design Augmented Bolt Catch/Release, 7.62mm

Admin — Tue, 11 Apr 2023 21:53:51 +0000

Forward Controls Design Augmented Bolt Catch/Release, 7.62mm (ABC/R 7.62) Note: 7.62mm ABC/R v3 is incompatible with 5.56mm spec AR lower receivers. ABC/R has finally made its way to 7.62mm, LR308 pattern ARs. ABC/R v3 has incorporated refinements and lessons learned since the ABC/R (v1, 5.56mm) was introduced in early 2015 and v2 (2017 to 2020). […]

The post Forward Controls Design Augmented Bolt Catch/Release, 7.62mm appeared first on Operation Parts, Inc..

Forward Controls Design 6 Position Standard AR15/M16 Receiver Extension

Admin — Fri, 23 Dec 2022 18:59:36 +0000

Forward Controls Design 6 Position Standard AR15/M16 Receiver Extension (REF) REF (Receiver Extension, carbine, FCD) is a 6 position, AR15/M4 standard carbine receiver extension (NOT A5 compatible). Made from extruded 7075 aluminum with rolled threads and dry film lubed interior, REF differs from most carbine receiver extensions thusly: * Additional drain holes in the 2nd and […]

The post Forward Controls Design 6 Position Standard AR15/M16 Receiver Extension appeared first on Operation Parts, Inc..