Kinetic Development Kinect MLOK Universal Picatinny/Surefire Offset Mount (KIN5-135)
The Kinect™ by KDG for MLOK™ is a revolutionary QD mounting system that will change the way we attach accessories to our modular weapons platforms. Much like the Sidelok™ for Picatinny attachment, Kinect™ insures proper and easy installation, eliminating common variables that would cause issues.(ie: over tightening) Although revolutionary, Kinect™ is quite simple in its operation. There are two spring-loaded wedges in the base of the Kinect™ mounting point. When you press the accessory or rail section down in the MLOK™ slot, two tiny deployment triggers get pressed against the rail firing the wedges into place. There is nothing more frustrating that fiddling with an allen wrench (if you can find it) to get your accessories on an off your weapon with traditional modular rail sections. This changes the whole dynamic of the MLOK™ system and really makes every accessory truly removable with the ability to mount it in a second when needed.
Specifications:
Compatibility: Works with any MLOK Rail system.
Dimensions: See Diagram pictured
Weight: 1.1 oz
Features: Surefire Scout light specific mounting space built into the picatinny
NOTICE TO ALL CUSTOMERS:
*The Kinect system was designed and precision manufactured to meet the specification of the Magpul MLOK system. Each piece is tested several times for fit before it leaves KDG. It will fit the wide tolerance range Magpul set for the thickness of the rail walls. The tolerance for thickness is 0.080” to 0.125” on the mounting plane of the rail. If your rail falls outside of this range on one side or the other, this accessory will not work. This range is so large that it is highly unlikely the rail you own could be that grossly out of specification but we have seen some. If the Kinect system does not work on your MLOK rail, your rail is out of spec. If this i the case for you, we do offer a 30 day return policy for store credit on purchases.
*The Kinect Pieces are made fully assembled from the factory and not intended to be disassembled by the end user. Because these are mechanical items, all kinect pieces are tested multiple times at the factory to insure they work properly and are securely mounted onto MLOK rails. So if you see marks of use on your new Kinect piece, do not worry, that is the factory test marks. Since the MLOK system has varying tolerances, each Kinect piece may attached differently to each different manufacturers rail. (ie: thicker rails, thinner rails, rails of different materials) Kinect was designed to work with the full range of MLOK accessories on the market. If you have any issues with your Kinect piece, contact us right away so we can fix the issue for you! Info@kineticdg.com
